(320) 629-3525
HiQual Heavy Duty Panels are the ultimate product for heavy confinement. Custom rolled 58,000 psi steel and heavy gauge construction help these premium panels stand up to the toughest abuse.

The 5 rail panels, pictured above, are perfect for runs and stalls or for use in roping arenas with cattle. For situations where height is a greater concern, such as rodeo arenas with roughstock, a 6 rail, 72” tall panel is also available.

Strength is enhanced by the square corner design and the notched vertical bracing system which greatly reinforces the center of the panel.

Since any panel is only as strong as its weakest component, HiQual performed extensive testing and research to ensure that the strength of the panel is balanced throughout. One result was the livestock proof, pin and clip connector system. When placed under pressure, the stress is spread over a wide area of the post. (see picture to left) A simple twist of the drop pin locks it into place. The opposing side has two square tubes to receive the pin, allowing for three way connections with no additional hardware. A variety of adapters are available for almost any configuration of panels.

When you opt for a frame gate or panel with 4’ gate, it comes with a self catching, spring loaded plunger latch.

 
Specifications
Height
5 rail: 60”
6 rail: 72”

Materials
2” dia. x 14 gauge posts
2” dia. x 16 gauge rails
1 1/2” dia. x 16 ga. vertical braces
58,000 psi hi-tensile tubular steel

Lengths & Weights
5 rail
8’ - 81 lbs
10’ - 95 lbs
12’ - 108 lbs
14’ - 125 lbs
16’ - 138 lbs
10’ with 4’ gate -155 lbs
12’ with 4’ gate - 175 lbs
4’ frame gate - 91 lbs
10’ frame gate - 220 lbs
12’ frame gate - 252 lbs
6 rail
10’ - 110 lbs
12’ - 125 lbs
16’ - 162 lbs
6 rail frame gates and panels with
4’ gates are available
as special orders.