(320) 629-3525
The General Duty Rancher Feeder is designed for optimum feed efficiency in cow/calf operations, offering 18 feeding stations measuring 14 1/4" wide x 38 1/4" high.

Waste is minimized around the feeder as the feeder, without legs, sits directly on the ground allowing for an eating height of 20". Inverted neck bars allow the animals to reach to the center of the feeder so that all feed is accessible to them. The top ring of the feeder is designed to funnel 6' x 6' round bales into the feeder without causing damage. It does accommodate those bales that are not perfectly round because the inside diameter is 7'6" and the outside diameter is 9'6".

As with all HiQual products the 297 pound feeder is durable and stands up to pressure. The Hi-tensile round tubing is 1 1/2" x 16 gauge material while the 18" high sheeting is 16 gauge. Overall height is 60".

If you are looking to minimize feed waste and lower the cost per head, this is the feeder for you.
 
Specifications
• Maximum Capacity: 1 - 6' x 6' round bale
• Eating Height: 20"
• Eating Stations: 18 - 14 ¼" x 38 ¼"
• Sheeting: 18" high x 16 gauge
• Feeder Diameter: 9'6" outside; 7'6" inside
• Overall Height: 60"
• Tubing Material: 1 ½" x 16 gauge Hi-tensile Round
• Sections: 3
• Paint: Baked on powder coat paint
• Weight (in pounds): 297
• Warranty: 1 year
 
Highlighted Features & Advantages
• Designed to funnel bale into feeder without damaging feeder. Bales do not have to be round
• Minimize waste by keeping feed inside feeder and eliminate waste around the feeder
• Very strong and durable
• Heavy Duty construction
• Inverted neck bars allow animals to reach center of feeder, thereby minimizing waste
• Lower cost per head than Tombstone Saver design