(320) 629-3525
The Heavy Duty Rancher Feeder is designed for optimum feed efficiency in cow/calf operations, offering 18 feeding stations measuring 14" wide x 37" high.

Waste is minimized around the feeder as the feeder, without legs, sits directly on the ground allowing for an eating height of 22". Inverted neck bars allow the animals to reach to the center of the feeder so that all feed is accessible to them. The top ring of the feeder is designed to funnel 6' x 6' round bales into the feeder without causing damage. It does accommodate those bales that are not perfectly round because the inside diameter is 7'6" and the outside diameter is 9'6".

The Heavy Duty Rancher Feeder is heavy at 500 pounds for ultimate durability. The Hi-tensile round tubing is 2 3/8" x .100 wall material while the 18" high sheeting is 16 gauge. Overall height is 60".

If you are looking to minimize feed waste with a feeder of heavy duty construction, look no further.
 
Specifications
 
• Maximum Capacity: 1 - 6' x 6' Round Bale
• Eating Height: 22"
• Eating Stations: 18 - 14" x 37"
• Sheeting: 18" high x 16 gauge
• Feeder Diameter: 9'6" outside; 7'6" inside
• Overall Height: 60"
• Tubing Material: 2 3/8" x .100 wall round
• Sections: 3
• Paint: Baked on powder coat paint
• Weight (in pounds): 500
• Warranty: 1 year
Highlighted Features & Advantages
• Designed to funnel bale into feeder without damaging feeder. Bales do not have to be round
• Minimize waste by keeping feed inside feeder and eliminate waste around the feeder
• Very strong and durable
• Heavy Duty construction
• Inverted neck bars allow animals to reach center of feeder, thereby minimizing waste
• Lower cost per head than Tombstone Saver design